User's Manual

BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET. SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK
AND CONTROL FROM YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS AND HOLD THE ON/STANDBY KEY ABOUT 2 SECONDS TO TURN THE UNIT ON.
- THE LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON AND WAITING FOR PARING.
- THE LED INDICATOR WILL REMAIN LIT ON WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH® DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION TO UNPAIR A BLUETOOTH® DEVICE THAT IS ALREADY PAIRED,
PRESS AND HOLD THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME DOWN KEYS ON
THE UNIT OR USING THE VOLUME CONTROLS ON YOUR BLUETOOTH® ENABLED DEVICE.
*NOTE THAT IF THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT NOR YOUR
BLUETOOTH® DEVICE ARE SET TO ZERO VOLUME AND THE CORRECT DEVICE FOR
PLAYBACK IS PAIRED.
E-4
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO HEADPHONE
(3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE "HEADPHONE-OUT OR AUDIO
LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET OF THIS UNIT.
- SELECT THE FUNCTION TO "AUX IN" BY PRESSING THE SOURCE KEY ONCE.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT AND THE EXTERNAL DEVICE WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE.
- SWITCH BACK TO BLUETOOTH® MODE ANYTIME BY PRESSING THE SOURCE KEY AGAIN.
SPEAKER OPERATION
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE KEY TO PAUSE
OPERATION. PRESS AGAIN TO RESUME OPERATION AT THE SAME TRACK & POSITION.
- AT ANYTIME DURING PLAYBACK, “PRESS AND RELEASE” THE NEXT OR BACK KEY :
OR TO SKIP BACKWARDS OR FORWAR DS BY ONE TRACK, AS DESIRED.
- PRESS THE PLAY/PAUSE KEY TO START PLAYBACK.
- THE UNIT INCLUDES A VERY USEFUL HANDS-FREE FUNCTION WHICH ENABLES YOU
TO USE IT AS A SPEAKER PHONE.
- MAKE SURE THE UNIT IS ON AND PAIRED WITH YOUR PHONE DEVICE AS DESCRIBED.
TO RECEIVE A CALL: PRESS THE HANDS-FREE KEY (7) ONCE.
TO END A CALL: PRESS THE HANDS-FREE KEY (7) AGAIN WHEN THE CALL IS FINISHED.
TO REJECT A CALL: PRESS THE ON/ STANDBY/ CALL REJECT KEY (8).
HANDS-FREE OPERATION
LOCATION OF CONTROLS
E-3
1. VOLUME DOWN KEY
2. VOLUME UP KEY
3. BASS KEY
4. BACK KEY
5. NEXT KEY
6. SOURCE KEY
7. PAIR/ PLAY/ PAUSE/
HANDS FREE KEY
TOP VIEW: FRONT VIEW:
BACK VIEW:
1 2 3 4 5
6
7 8
9
11
12
13
8. ON/ STANDBY/ CALL REJECT KEY
9. SPEAKER
10. LED INDICATOR
11. AUX IN SOCKET
12. CHARGING LED INDICATOR
13. MICRO USB CHARGING SOCKET
14. MICROPHONE (FOR HANDS FREE)
15. BATTERY COMPARTMENT
10
FOR BEST RESU LTS, FULLY CHARGE YOUR SPEAKER SYSTEM BE FORE USE.
POWER SUPPLY : RECHARGEABLE LITHIUM BATTERY 3.7V 1000mAh x 1PC
RECHARGE POWER: USB DC 5V, 700mA
SPECIFICATIONS
15
14
SPEAKER CHARGING
USB 5V
THE CHARGING LED INDICATOR WILL TURN RED TO INDICATE IT IS IN CHARGING MODE.
WHEN THE UNIT IS FULLY CHARGED, THE CHARGING LED INDICATOR WILL AUTOMATICALLY
SWITCH OFF.