User's Manual

BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE WITHIN
30 FEET. SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL
FROM YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- SWITCH THE ON/OFF SWITCH TO TURN THE UNIT ON.
- THE BLUETOOTH LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON AND WAITING
FOR PARING.
- THE LED INDICATOR WILL REMAIN LIT ON WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH® DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION TO UNPAIR A BLUETOOTH® DEVICE THAT IS ALREADY
PAIRED, PRESS AND HOLD THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME DOWN KEYS
ON THE UNIT OR USING THE VOLUME CONTROLS ON YOUR BLUETOOTH® ENABLED
DEVICE.
*NOTE THAT IF THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT NOR YOUR
BLUETOOTH® DEVICE ARE SET TO ZERO VOLUME AND THE CORRECT DEVICE FOR
PLAYBACK IS PAIRED.
LOCATION OF CONTROLS
E-3
1. SPEAKER
2. VOLUME UP KEY
3. PAIR/ PLAY/ PAUSE/ HANDS FREE KEY
4. VOLUME DOWN KEY
5. MICRO USB CHARGING SOCKET
6. CHARGING LED INDICATOR
7. BLUETOOTH LED INDICATOR
8. AUX INPUT SOCKET
9. MICROPHONE (FOR HANDS FREE)
10. ON/ OFF SWITCH (BOTTOM OF UNIT)
E-4
BACK VIEW:
FOR BEST RESULTS, FULLY CHARGE YOUR SPEAKE R SYSTEM BEFORE USE.
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- YOU CAN CONNECT THE AUDIO OUTPUT OF AN EXTERNAL DEVICE SUCH AS A MP3
PLAYER TO THIS UNIT, TO LISTEN TO THE SOUND OF THAT DEVICE THROUGH
THE HIGH QUALITY AMPLIFIER OF THIS MUSIC SYSTEM.
- TO CONNECT THE EXTERNAL DEVICE PLEASE USE A STANDARD STEREO HEADPHONE
(3.5MM TO 3.5MM PLUGS) CABLE TO CONNECT THE "HEADPHONE-OUT OR AUDIO
LINE-OUT" OF THE DEVICE TO THE AUX-INPUT SOCKET OF THIS UNIT.
- SWITCH ON THE EXTERNAL DEVICE (eg. MP3-PLAYER).
- START PLAYBACK OF THE EXTERNAL DEVICE AND ADJUST THE VOLUME CONTROL
OF THE UNIT TO THE DESIRED LEVEL.
- REMEMBER TO SWITCH OFF THE UNIT AND THE EXTERNAL DEVICE WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE.
- REMEMBER TO UNPLUG THE 3.5MM AUX-IN PLUG FROM THE UNIT WHEN YOU ARE
FINISHED USING THE EXTERNAL DEVICE, TO SWITCH BACK TO BLUETOOTH® MODE.
POWER SUPPLY : ................... RECHARGEABLE LITHIUM BATTERY 3.7V/800mAh x 1PC
RECHARGE POWER: USB DC 5V, 500mA (OR HIGHER)
SPECIFICATIONS
SPEAKER OPERATION
- AT ANYTIME DURING PLAYBACK, PRESS THE PLAY/PAUSE KEY TO PAUSE
OPERATION. PRESS AGAIN TO RESUME OPERATION AT THE SAME TRACK & POSITION.
- AT ANYTIME DURING PLAYBACK, “PRESS AND RELEASE” THE NEXT OR BACK KEY :
OR TO SKIP BACKWARDS OR FORWARDS BY ONE TRACK, AS DESIRED.
- PRESS THE PLAY/PAUSE KEY TO START PLAYBACK.
- THE UNIT INCLUDES A VERY USEFUL HANDS-FREE FUNCTION WHICH ENABLES YOU
TO USE IT AS A SPEAKER PHONE.
- MAKE SURE THE UNIT IS ON AND PAIRED WITH YOUR PHONE DEVICE AS DESCRIBED.
TO RECEIVE A CALL: PRESS THE HANDS-FREE KEY (3) ONCE.
TO END A CALL: PRESS THE HANDS-FREE KEY (3) AGAIN WHEN THE CALL IS FINISHED.
HANDS-FREE OPERATION
SPEAKER CHARGING
USB 5V
1
2
3
4
5
6
7
8
9
10
FRONT VIEW:
THIS UNIT COMES WITH A MICRO USB PORT FOR CHARGING.
USE THE SUPPLIED MICRO USB CABLE TO CONNECT THE UNIT TO ANY STANDARD USB
PORT. CHARGING TIME DEPENDS ON THE OUTPUT CAPACITY OF THE USB PORT,
BUT IT WILL TAKE AVERAGELY 2 HOURS FOR A FULL CHARGE
(BASED ON A 1000MA USB PORT). PLAYBACK TIME DEPENDS ON THE TYPE
OF MUSIC YOU ARE LISTENING TO AND THE VOLUME LEVEL, BUT IT CAN PLAY UP
TO 6 HOURS UNDER NORMAL CONDITIONS.
WHEN IT IS SUCCESSFULLY BEING CHARGED, THE LED INDICATOR WILL TURN RED
TO INDICATE IT IS IN CHARGING MODE.
PLUG-IN TO CHANGE TO AUX-IN MODE
UNPLUG TO CHANGE TO BLUETOOTH® MODE