User's Manual

E-6
E-5
ALARM FUNCTION
- THIS SET IS EQUIPPED WITH 2 ALARM MODES: BUZZER RADIO.
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "DIGITAL
CLOCK FUNCTION" IN THE PREVIOUS SECTION) .
AND
PREPARE FOR THE ALARM SETTINGS
1
2. PRESS AND HOLD AL-SET/ AL-MODE KEY UNTIL
THE DISPLAY WILL NOW SHOW:
3. PRESS SKIP- / SEARCH- AND SKIP+ /SEARCH+ KEY TO REACH THE HOUR
OF THE DESIRED WAKE UP TIME THEN PRESS AL-SET/ AL-MODE KEY TO CONFIRM.
THE DISPLAY WILL NOW SHOW:
. PRESS THE ON/OFF KEY TO PUT THE SET INTO "STANDBY" MODE
00 00
HOUR (FLASHING)
MINUTES
(FLASHING)
8 00
4. PRESS SKIP- / SEARCH- AND SKIP+ /SEARCH+ KEY TO REACH THE
MINUTES OF THE DESIRED WAKE UP TIME, THEN PRESS THE AL-SET/ AL-MODE
KEY TO CONFIRM.
5. ADJUST THE VOLUME LEVEL AS DESIRED (FROM LEVEL 03-30) BY PRESSING
VOL. UP + OR VOL. DN - KEY. PRESS THE AL-SET/ AL-MODE KEY
TO CONFIRM.
A. "ALARM" TIME SETTING
ONCE THE DESIRED SOURCE IS READY, PRESS THE ON/ OFF KEY TO PUT THE
SET INTO STANDBY MODE AND THEN SHORT PRESS THE AL-SET/ AL-MODE KEY
REPEATEDLY TO SELECT THE SOURCE AS DESIRED.
B. "ALARM" MODE SETTING
NOW SELECT THE SOURCE THAT YOU WISH THE UNIT TO PLAY AT THE "WAKE UP"
TIME AS BELOW:
FOR RADIO :
PRESS THE ON/ OFF KEY TO SWITCH ON THE SET (DISPLAY BACKLIGHT WILL
BE "ON").
TUNE IN THE DESIRED STATION.
*REMARK: = BUZZER ALARM / = RADIO
FM
SNOOZE FUNCTION
- WHENEVER THE ALARM COMES ON, IT C AN BE TEMPORARILY S USPENDED
FOR A SHORT PERIO D O F 9 M IN UTES, BY PRESSIN G THE “SNOOZE/ D IM MER” KEY
ONCE.
- THE ALARM WIL L THEN AUTOMATIC ALLY COME O N AGAIN AFTER THE 9 M IN UTES
“SNOOZE” P ERIO D HAS E NDED.
- THE P ROCEDURE CAN B E REPEATED FOR APPROXIMATELY 90 M INUTES FROM
ORIG IN AL ALARM WAKE-UP TIM E.
2. THE SET WILL NOW AUTOMATICALLY SWITCH "ON" AT THE WAKE-UP TIME AS YOU
HAVE CHOSEN, AS LONG AS THE ALARM FUNCTION IS "ACTIVE".
3. TO TURN OFF THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED ON,
SIMPLY PRESS THE ON/OFF KEY ONCE. THIS WILL SWITCH OFF THE SET
BUT WILL NOT CLEAR THE ALARM SETTINGS, AND THE SET WILL SWITCH ON
AGAIN AUTOMATICALLY ON THE NEXT DAY AT EXACTLY THE SAME PRESET TIME.
4. TO DEACTIVATE THE ALARM, PRESS & RELEASE THE AL-SET/ AL-MODE KEY. THE
ALARM SYMBOL "AL" DISAPPEARS FROM THE DISPLAY.
5. TO ACTIVATE THE ALARM AGAIN, REPEAT THE PROCEDURE OF "ALARM TIME
SETTING" AS DESCRIBED.
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS
OFF*
40
MINS
30
MINS
20
MINS
10
MINS
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS & HOLD THE SLEEP KEY
UNTIL THE "SL" SYMBOL FLASHES, THEN PRESS THE SLEEP KEY REPEATEDLY
TO CHOOSE THE AUTOMATIC POWER OFF TIME.
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
AUTOMATIC POWER OFF SLEEP FUNCTION
1. THE ALARM TIME IS NOW FULLY PROGRAMMED AND THE ALARM SYMBOL WILL
APPEAR TO INDICATE THAT THE ALARM FUNCTION IS "ACTIVE".
(DISPLAY SHOWS AS FOLLOWS)
CURRENT TIME
12:00
ALARM SYMBOL
AL
FM
FM SYMBOL
BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET.
SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM
YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS THE ON/STANDBY KEY TO TURN THE UNIT ON.
- PRESS THE FUNC. KEY UNTIL BT SYMBOL APPEASRS.
- THE LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON AND WAITING
FOR PARING.
- THE LED INDICATOR WILL KEEP REMAIN LIT WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOTH DEVICE:
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE’S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE’S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER “0000”
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
®