User manual

6
www.sc-black.com
SECTION 2: INSTALLATION AND SETUP
c. At the command prompt, enter ipcong. The PC will display Ethernet data associated with
your Ethernet adapter LAN connection.
Example: Typical use of ipcong in Windows XP
d. Enter the IP Address, Subnet Mask, and Default Gateway for your PC’s Ethernet adapter into
Table 1.
NOTE
The Ethernet adapter data you see by using ipcong will probably be different from that
shown in the example above. If you are using Windows Vista or Windows 7, the IP address
is identied as the “IPv4 Address.”
Table 1. PC/Camera network settings
Computer (PC) Camera
IP Address
Subnet Mask
Default Gateway
CAUTION

If connecting your camera to an enterprise network, consult with your network
administrator for the camera IP address, subnet mask, and default gateway.
2. At your PC, nd an IP address on your network that is not in use: