User manual
4
www.sc-black.com
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your camera includes the following:
• BLK-IPS102M camera
• Cap for protecting the sensor
• DC power adapter with power plugs for different powering sources
• DC jack adapter cable
• Adapter for mounting the camera
• 9-pin terminal block
• Hex wrench
• Quick installation guide
• CD mini disk with application software, software manual, and camera manual (this document)
2.2 Tools you need
To install the camera, you will need:
• Phillips #1 or #0 screwdriver
• Mounting bracket
• Compatible lens
• PC with Microsoft
®
Windows
®
XP SP3 or newer
NOTE
Supercircuits recommends that a manual iris megapixel lens is used with this camera to
support its full resolution.
2.3 Find an IP address for your camera
Devices attached to an Local Area Network (LAN) are each assigned a unique address (IP address) that
they use when sending messages with each other. No two devices on a single Ethernet network can have
the same IP address. Otherwise, conicts will occur.