User manual

32.0 Megapixel H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
Reset USB connector
Micro SD
card slot
LAN
connector
9-pin
terminal
block
DC jack
adapter
cable
connector
Back connectors
Reset – For restarting the camera, or resetting the camera to its factory default network settings. Refer
to Appendix A, Troubleshooting, for more information.
USB connector – For a USB storage device or Wi-Fi networking device
9-pin terminal block – For DI, DO, audio, and serial communication
Power adaptor connector (DC 12V) – For use with the DC jack adapter and the DC12V power adapter
(provided).
Micro SD card slot – SD memory card slot for external storage. SD memory card is not included.
LAN connector (Ethernet) – For an RJ-45 LAN cable with 10/100Base-T Ethernet