User manual
172.0 Megapixel H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
IP Setup window
5. In the Login window, enter the ID and PW (password) for your camera and click Login. The default
administrator values for the ID and PW are root and pass. After entering ID and PW, the IP Setup
window closes.
6. In the IPAdmin Tool window, click Refresh and verify that the entry representing the camera now
shows the new IP address.
2.9 Setup the camera Basic Conguration
In this procedure, Microsoft Internet Explorer (IE) browser is used to setup the camera administrator and
user passwords, date, and time.
1. Open the IE browser.
2. In the URL eld (Internet address), enter the IP address for your camera in the format:
http://<IP address>/
where <IP address> is the IP address of your camera. Following the example earlier in this guide,
the entry would be: http://192.168.1.201
3. If prompted to install an ActiveX control such as AxNVC.cab, follow screen prompts to install the
software.