User manual

16
www.sc-black.com
SECTION 2: INSTALLATION AND SETUP
IPAdmin Tool discovering 192.168.0.100
2. In the Product list, nd the entry with the same MAC address as the camera you installed. If the
camera is not shown, click Refresh repeatedly to update the list.
3. Right click on the entry for your camera and select IP Address.
4. In the IP Setup window:
a. Select the Static option if it is not selected. This option is required for if camera video will
be recorded by a network DVR, or if you want to view video from the camera across a WAN
(Internet).
b. Enter the IP address for your camera from Table 1 into the IP Address eld.
c. Enter the subnet mask for your computer from Table 1 into the Subnet Mask eld.
d. Click SETUP. A Login window will open.