User manual
152.0 Megapixel H.264 Network IP Camera User Manual
SECTION 2: INSTALLATION AND SETUP
1. Attach a LAN cable to the Ethernet connector on the back of the camera.
2. Attach the DC jack adapter cable to the DC 12V power adapter terminals on the back of the
camera. Connect the red wire of the adapter cable to the + terminal, and the black (or white) wire
to the - terminal.
DC jack
adapter
cable
3. Attach the DC jack Adapter to the DC power adapter provided, and plug the adapter into a power
source.
2.8 Congure the camera IP address
1. Open the directory where you installed IPAdmin Tool. Double click the le IPAdminTool.exe to start
the application. When the IPAdmin Tool starts, it will discover all of the IP cameras it supports that
exist on the network. The discovery process may take a few minutes.