Specifications

73IP Camera and Encoder Software Manual
SECTION 5: REFERENCE TO MODELS
NOTE
To use RS232C, use the 485-232 converter.
5.4 BLK-IPS102M
Video-in menu: The video input setting page for BLK-IPS102M (go to SETUP > Video & Audio >
Video-in) is different from that of other devices.
Video Resolution: The codec resolution depends on the resolution of the video input and the codec type
selected.
Video-In Resolution
Codec Resolution
H.264 and MJPEG MPEG4
UXGA (1600 x 1200)
UXGA, SXGA, HD720, XGA, D1, 4CIF, VGA
Not available: CIF, QVGA, QCIF
D1, 4CIF, VGA
Not available: UXGA, SXGA, HD720, XGA, CIF,
QVGA, QCIF
SXGA (1280 x 1024)
SXGA, HD720, XGA, D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, QCIF
D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, SXGA, HD720, XGA, QCIF
HD720 (1280 x 720)
HD720, XGA, D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, SXGA, QCIF
D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, SXGA, HD720, XGA, QCIF
XGA (1024 x 768)
XGA, D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, SXGA, HD720, QCIF
D1, 4CIF, VGA, CIF, QVGA
Not available: UXGA, SXGA, HD720, XGA, QCIF
D1 (720 x 480)
D1, 4CIF, VGA, CIF, QVGA, QCIF
Not available: UXGA, SXGA, HD720, XGA
D1, 4CIF, VGA, CIF, QVGA, QCIF
Not available: UXGA, SXGA, HD720, XGA
To use MPEG-4 codec with QCIF resolution, set the Video-In Resolution to D1.
To use MJPEG codec with UXGA resolution, set the Video-In Resolution to UXGA.
Image Signal Processing
• Adjust Mirror:
— None (Default)
— Horizontal
— Vertical
— Horizontal & Vertical
• Lighting Attribute Frequency:
— 50 Hz
— 60 Hz (Default)
Codec (SETUP > Video & Audio > Codec)
The resolutions available depend on the resolution of the video input and the codec type selected.