Specifications

www.sc-black.com

SECTION 3: SETUP CONFIGURATION

SECTION 4

Safety Mode

4.1 Safety Mode

Your encoder or IP camera could encounter an unexpected condition such as a faulty rmware le or

uncompleted rmware load during system boot up. To restore the device to a minimal level of operation,

emergency rmware is loaded and the device restarts in Safety Mode.

4.2 Causes of Safety Mode

The two most common reasons why a device boots in Safety Mode are:

• The power supply is unplugged during system boot up.

• Firmware les required for system boot up are damaged.

The device does not return to the Safety Mode booting until normal booting is attempted 5 times.

4.3 Recovering from Safety Mode?

When the following screen appears, the system rebooted in Safety Mode. Follow the steps shown on the

screen.