Specifications
60
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
3.9.1 Zones and Rules
To congure zones and rules for motion detection, go to SETUP > Motion Detect
Motion Detect setup screen with metadata enabled (Zone 6 selected)
To graph meta data on the right side graph bar, go to the System Options > RTSP/RTP > UNICAST tab
and select the option Include meta data.
Motion Detect setup screen
In the Motion detect screen, eight detection zones, each individually congurable for motion detection,
are distributed across the camera image. Below the camera image, an active table is provided where
zones can be enabled and disabled, and zone sensitivity and object size detection can be adjusted. To
the right of the camera image, space is provided where the meta data generated from motion detected in
a zone is graphed.
In the screen capture above, the spike in the graph was caused by truck that passed through the
selected zone (Zone 6).