Specifications

59IP Camera and Encoder Software Manual
SECTION 3: SETUP CONFIGURATION
1. Select Enable System Log.
2. Enter the maximum size of system log les (32KB ~ 200KB). Up to 5 les are created. When an
additional le is created, it replaces the oldest one (FIFO).
3. Click Apply.
To see the log list and open a log le, click the LOG LIST button. The list displays:
Name: The log les are named automatically.
Size: Log le size is updated in real time.
Latest access time: Last time the device accessed the system to retrieve the le.
To open a system log, click the Name.
3.7.3 Webpage option for VCA
You can display the Video Contents Analysis (VCA, optional) stream on the VIEW screen. Go to SETUP >
Maintenance > Webpage. On this page, select Display VCA streaming at the VIEW page and then
click Apply.
3.8 VCA
3.9 Motion Detect
Motion Detect settings allow you to congure the zones and rules required for motion detection. These
settings require administrator or operator access privilege.