Specifications

56
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
UART2 menu
Type – Internal
RS485-PTZ: Used when you attach a PTZ camera to an encoder. When RS485-PTZ is selected,
the required PTZ protocol and the control daemon are run. This feature is supported in the UART1
port only.
RS485-AUX: Used when you attach any auxiliary device which requires serial communication to an
encoder. This feature is supported in the UART1 port only.
RS232-PTZ: Used when you attach a PTZ camera to an encoder and you are using RS-232
communication protocol.
RS232-AUX: Used when you attach any auxiliary device to the encoder and you are using RS-232
communication protocol.