Specifications
50
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
3.5.11 LED Setting
NOTE
This LED setting page is based on a H.264 video encoder. If you are conguring a different
device, see Section 5.
Status LEDs on a camera or encoder can be congured to light when an event, such as a video signal
loss (vsignal), DI event, recorder on, etc. occurs. You can customize the LED operation according to your
system requirement. To congure how the LED(s) function, go to SETUP > System Options > LED
Example
Scenario
“When the video signal loss is detected, let top LED blink every 5 seconds”
Setting:
Enable: select
Location: LED1