Specifications

48
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
Step 7. Secondary recording settings – Rule of segmentation
• Do not segment: Select this option if you want to record data as one le.
• Every ___ megabyte(s): If you select this option, enter the size in MB for each segment
(fragment).
• Every ___ minute(s): If you select this option, enter the number of minutes for each segment.
Step 8. Secondary recording settings – Stream Source
The Secondary recording Stream Source provides a continuous snapshot mode of recording in JPEG
format. This stream does not depend on the codec used for the Primary stream recording mode.
Continuous shot as follows: Check this option to select a snapshot recording stream, and then set the
Resolution, Quality, and FPS (frames/second). If you choose CUSTOM Resolution, you can set the image
width and height within the bounds of the standard resolution sizes.
None: If this option is selected, the device does not record a snapshot stream.
Step 9. Click Apply.
Click the Apply button to save and apply the setting.
Step 10. Click the START or STOP button to start or stop recording.
Event recording
Event recording setup is identical to normal recording, except that instead of starting a recording by
clicking start or inserting a storage device, recording is triggered when an event is sensed through video
content analysis (VCA, optional).
To use VCA (optional) triggering:
1. Set the time of the post-alarm timeout. The post-alarm timeout is length of time recording
continues following the detection of a VCA event. Additional VCA events will re-trigger recording.
2. Select “Enable automatic recording with VCA event triggering” to enable the VCA event recording.