Specifications
1IP Camera and Encoder Software Manual
SECTION 1: INTRODUCTION
SECTION 1
Introduction
This manual describes features of the H.264 codec supporting SCBlack encoders and cameras through
a web interface using Microsoft
®
Internet Explorer.
The web interface uses these protocols:
• HTTP API: Parameter conguration commands
• RTP/RTSP: Video, Audio, and metadata streaming
• Active X: program: Image display on a client PC
NOTE
This manual is based on a H.264 network video encoder. The web based user interface for all
encoders and IP cameras is similar. However, because of feature differences, items included
on some menus differ between models. Refer to the Section 5. Reference to Models, for more
information.
1.1 Getting started
All SCBlack IP cameras and encoders are shipped with the following network settings:
IP address: 192.168.0.100
Subnet mask: 255.255.0.0
Gateway: 192.168.0.1
Because all SCBlack IP cameras and encoders are factory congured with the same IP address, they
must be attached to the network and congured singularly. The IPAdmin Tool, provided with your camera
or encoder, can be used to change these settings.
After conguring the network settings for your camera or encoder, the Microsoft Internet Explorer
browser is used to access the camera to setup the application specic conguration.
1.1.1 Installing the IPAdmin Tool
The IPAdmin tool is provided on the CD included with each camera and encoder product. It consists of
two les:
• IPAdminTool.exe
• IPAdminTool.dll