Specifications
42
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
• Digest: Use enhanced encryption. Refer to RFC2617 - HTTP Authentication: Basic and Digest
Access Authentication for additional information.
Privilege: Select an option from the dropdown list.
RTSP conguration for MULTICAST
RTSP can be congured for MULTICAST or UNICAST. Click the tab on the selection bar to choose the
operational mode. In Multicast mode, the 1st stream and 2nd stream can be congured differently.
IP Address: Enter a specic IP address for streaming, or use “0.0.0.0” to allow the router to determine
the IP address.
NOTE
UDP/RTP multicast is not allowed for streaming.
How auto conguration of an IP address works
Since the session name for each RTP session is dened on the server, your PC can receive the
stream by going to “rtsp://<rtsp server ipaddress>:<port>/<rtp session name>”.
Port: Set the port number used for the router to receive the streaming data from the product. “18888” is
set for video data of 1st stream and “28888” is for video data of 2nd stream.
TTL: Set the TTL (Time to Live) value. If TTL = 1, the packet will pass 1 subnet (router).
What is TTL?
TTL can be dened as the maximum number of routers a data packet is allowed to pass though on
the path to its destination before it is discarded. If data packets sent from the encoder across the
network live permanently on a network, a high network load can occur.
Packet Size: Select the packet size in consideration of your network bandwidth. The factory default is
1500 bytes.
Session name: Enter the session name. Session names can be at most 64 alphanumeric characters and
include the underscore character ( _ ).
Session information: Enter the session information you want to display.
Session Description: Enter the session description (detailed information).
Include audio stream: Select this option to include the audio stream with the video stream.