Specifications
38
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
2. After a few seconds, click Refresh Network List. Detailed wireless adapter information will
appear.
3. Click on the network you want to access. Device information such as ESSID, mode, MAC address,
channel, and encryption will appear on the right side of the list window.
4. Click Copy to user Setting to copy the device information to the “Networks to connect” frame.
NOTE
If a ‘Not Connect Wireless….’ message is displayed after clicking the ‘Refresh Network List’,
check the setting of your wireless router. Also make sure the USB wireless LAN adapter is
installed correctly.
Connecting to a wireless network
After choosing a wireless network, the ‘Network name, Mode, Authentication, and Encryption’ are
displayed on the screen.
1. Enter the ‘Network key’ in the eld provided. The network key should equal the AP or client PC you
will communicate with.
2. Set the Timeout, Retry count, and Disable auto start functions using the information below.
Timeout: When an answer is not received from the server within a set period, a timeout occurs.
Set the timeout duration to one of the options in the dropdown list. A reconnection to the server is
required.
Retry count: The number of re-connections attempts when a timeout occurs.
Disable auto start: Click this checkbox when you do not want to automatically start wireless
networking.
NOTE
The current time out or retry count is not renewed automatically. Try to renew the page manually
to see if the network is connected properly.
3. Set the wireless network IP conguration. If your mode is Ad-Hoc, only a static IP setting is allowed.
Obtain IP address via DHCP: Obtain the IP address from DHCP (dynamic IP).
Use the following IP address: Set the IP address manually (static IP). The IP address must be
unique on the network.