Specifications
33IP Camera and Encoder Software Manual
SECTION 3: SETUP CONFIGURATION
NTP Server Lists
Up to four NTP servers can be listed. A test button is provided to verify connectability to each server.
Before applying a new server list, setup and verify the DNS conguration. Go to: System Options >
TCP/IP
Local SNTP Server Setup
I am SNTP Server: Selecting this option reduces the network load for acquiring time information by
accessing only the NTP servers with this option set. It is also called a ‘Squid server.’ Other servers for the
device are synchronized with this Squid server.
To use this feature:
1. Enable I am SNTP server and click Apply.
2. Access the webpage of the device. (It should be a client device of the squid server.)
3. Go to System Options > NTP and enter the IP address of squid server in the “NTP Server 1st”
eld.
4. Click the test button to verify connectability.