Specifications

32
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
If you use a NAT router for the network connection of the device, you may need to set the IP address or
domain name, and RTSP port number.
1. Check Enable network connection via public IP address and port.
2. Enter the IP address and port number of your router.
3. Click Apply.
When you use a domain name, ensure that either DNS or DDNS is enabled.
Go to System Option > TCP/IP for DNS settings.
Go to System Option > DDNS for DDNS settings.
NOTE
The IP address of the NAT router should be set manually.
3.5.3 NTP
To change the NTP server setting, go to: SETUP > System Options > NTP