Specifications
31IP Camera and Encoder Software Manual
SECTION 3: SETUP CONFIGURATION
Use the following IP address
To use the device with the static IP address, enable the ‘Use the following IP addresses’ and click Apply.
IP address: The IP address of your device.
Subnet mask: The address of subnet mask of your device.
Gateway address: The gateway address of your device.
Broadcast address: The Broadcast address is automatically xed by the subnet mask and the IP
address. For example, if you use a class B (255.255.0.0) subnet mask, the broadcast address will
be 192.168.255.255.
test: The test button shows if the IP address entered is in use or not. If the IP address is in use, do not
assign this address to the device. The test program may take a few minutes to complete.
DNS Conguration
Enter the IP address of the primary and secondary DNS servers for the network.
3.5.2 NAT
To changes the NAT setting, go to: SETUP > System Options > NAT