Specifications

22
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
Listen
Listen to the audio ...: Check (and click Apply) to enable audio streaming from the camera or encoder to
your PC. The SPK checkbox on the VIEW screen must also be checked to switch on the audio.
Sampling frequency: Set the sampling frequency to 8 kHz or 16 kHz.
Channel: Only one audio channel (mono) is supported.
Codec: Select the audio codec (PCM or ITU-T G.711) by choosing one of the supported options.
Volume control: The volume is adjustable from 1 (low) to 255 (high). The default value is 128.
Talk to
Talk to the speakers ...: Check (and click Apply) to enable audio streaming to the camera or encoder
from your PC. The MIC checkbox on the VIEW screen must also be checked to switch on the audio.
NOTE
The codec conguration and sampling frequency of the audio output is also applied to the audio
input.
TCP/IP listen port: Set the port for listening to the audio received from the camera or encoder. The
default is port 6000.
Volume control: The volume is adjustable from 1 (low) to 255 (high). The default value is 255.