Specifications
16
www.sc-black.com
SECTION 3: SETUP CONFIGURATION
16
Current Server Time: The Current Server Time eld shows the current server time.
New Server Time: Time zone: Choose a time zone from the drop-down list. If you check the
‘Automatically adjust for daylight saving time changes,’ daylight saving time is applied according to your
time zone setting.
New Server Time – Method: Select one of 3 options:
• Synchronize the clock in your PC
• Synchronize with NTP server - with this option you can choose up to four NTP servers from which
the device will synchronize its clock
• Set the server time manually
Time synchronization
NTP server: Server time is synchronized with an NTP server. You can specify up to four NTP Servers at:
SETUP > System Options > NTP, or click the server URL shown in the frame.
Real Time Clock on system: Server time is synchronized with the Real-time clock in the server. The
clock is embedded in the device and is recharged when the server is started.
Interval of synchronization
• Everyday 00:00: When enabled, synchronizes the device clock at every midnight
• Disabled: Synchronizes only when the device is rebooted (factory default)
3.3 Video & Audio
Through this menu you can set up the Video-in, Burnt-in Text, Codec, Audio, and Snapshot conguration.
These settings require operator or administrator access privilege. To change the setting for video input,
burnt-in text, audio, and snapshot, go to: SETUP > Video & Audio
3.3.1 Video-In
NOTE
This section describes video input settings based on the H.264 video encoder. If you are
conguring a different device, see Section 5.
When you select Video-In from the Video & Audio menu, the Video Input Setting page is displayed. The
Video Input Setting page provides options to:
• Name a channel for the camera
• Select the standard format for video
• Activate the deinterlacing algorithm