Specifications

11IP Camera and Encoder Software Manual
SECTION 3: SETUP CONFIGURATION
Reset: Display the current conguration.
3.2 Basic Conguration
Through menus in this category you can setup Users, the Web Server, and the Date and Time
conguration. These settings require Administrator access privileges.
3.2.1 User management
The menus you are allowed to access depend on your user group. Three categories of users are
provided: Viewer, Operator, and Administrator. An administrator user can view and set all conguration
options in all SETUP menus. The administrator user “root” is not removable, but the associated password
can and should be changed during the initial conguration of the device. Refer to the table below for
details about accessible menus for each account.
Table 2. User Management
User Group Accessible Menu
Viewer VIEW screen only.
Operator
VIEW and SETUP
Video & Audio menu
Event Conguration menu
Motion Detect menu (view only)
Administrator All screens and menus
User name requirements: A user name can contain from 1 to 14 characters. Character range: upper
and lower case letters, and the numbers 0 through 9. A maximum of 32 accounts can be established in
a group.
Password requirement: A password can contain from 1 to 8 characters. Character range: upper or
lower case letters, and the numbers 0 through 9.
User Authentication
To require user authentication:
1. Go to SETUP > Basic Conguration > Users.
2. Select Enable.