Specifications
7IP Camera and Encoder Software Manual
SECTION 2: USING THE INTERNET EXPLORER BROWSER
A CB
H
GFED
J
I
K
VIEW screen controls and OSD data
A. FIRST STREAM / SECOND STREAM: Click the down arrow, then click the stream you want
to display. The device supports two streams with 1 video input. It enables you to use each stream
differently; for example, one stream can be used for recording and the other for viewing. Initially the rst
stream is congured for MPEG video at 30 fps, and the second stream is congured as MJPEG at 5 fps.
To change this conguration, go to SETUP > Video & Audio > Codec.
B. UNICAST-RTSP / MULTICAST - RTSP: On this pull-down list, you can choose either RTSP or RTP
streaming with either unicast or multicast session. To set the RTSP/RTP conguration, go to SETUP >
System Options > RTSP/RTP
C. Play / Stop: Play or stop the video display.
D. FullScreen: Click this option to extend the image to the full screen. To return to normal view, press
the ESC key.
E. SPK: Select this option to listen to the audio data captured from a microphone at the camera or
encoder. Go to SETUP > Video & Audio > Audio to enable the feature and congure the audio settings.