Installation guide

3
www.digiop.com
© 2011 Digiop, Inc. All rights reserved.
2. Open the IPAdminTool directory on your computer, then double click the le IPAdminTool.exe to
start the application. When the IPAdmin Tool starts, it will discover all the IP devices it supports that
exist on the network. The discovery process may take a few minutes.
3. In the Product list, nd the entry with the same MAC address as the camera you installed. If the
camera is not shown, click Refresh once a minute to update the list.
4. Right click on the entry for your camera and select IP Address.
Static Option
5. In the IP Setup window:
a. Select the Static option if it is not selected.
b. Enter the new IP address for your camera into the IP Address eld.
c. Enter the subnet mask of your computer into the Subnet Mask eld.
d. Enter the gateway of your computer into the Gateway eld.
e. Click SETUP. A Login window will open.
6. In the Login window, enter the ID and PW
(password) for your camera and click Login. The
default administrator values for the ID and PW are
root and pass.
7. In the IPAdmin Tool window, click Refresh. Verify that the entry representing the camera now
shows the new IP address.
Step 5. Setup camera Basic Configuration
To view video images from the camera, at a computer attached to the LAN where the camera is installed,
open Microsoft
©
Internet Explorer and go to:
http://<IP address of the camera>
If the IP address is 192.168.1.201, enter: http://192.168.1.201
If prompted to install ActiveX controls such as AxAll.cab (publisher Cap Co), AxPTZ, or AxNVC, follow screen
prompts to install the software.
NOTE
To load these ActiveX controls, you may need to adjust the security settings of your browser to
accept add-ins from unknown publishers.
After logging into your camera, if you cannot see live video from the camera and the message: “Can not
Create XMLDOMDocument Install MSXML4.0” appears, download and install the MS XML 4.0 library. This
library can be found at:
http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-
C5D7485F2B42&displaylang=en
After the camera VIEW screen appears, click SETUP and enter the default User name and Password, root
and pass.
In the SETUP window, go to Basic Conguration > Users.
In the User list, click root to highlight it, and then click Modify. Enter a new password and click OK. In the
Users screen, click Apply, and then click OK to restart the server.
Go to Basic Conguration > Date & Time.
On the Date & Time screen, set the Time Zone, Method, and Time Synchronization options. Click Apply.
Click VIEW to exit SETUP mode and return to the live viewing screen.
Aim and Focus the camera
Set focus and zoom while observing video image from the camera. Video is provided through the web
browser. Use the documentation provided with your camera mounting bracket and lens to make these
adjustments.