User's Guide
S&C Instruction Sheet 461-512LD 9
Software
Figure 8. The Status screen.
Figure 7. The gateway controller Login screen.
STEP 3. With the CAT5 cable attached to the gateway
controller’s Ethernet Port 1, launch a Web
browser on the PC. In the URL address line, type
the gateway controller default IP address of
192.168.1.1 and press the <Return> key.
(Browser versions supported include Google
Chrome and Internet Explorer.) The Login
screen will open with a username and password
challenge.
Note: The default username and password
can be requested from S&C by calling the Global
Support and Monitoring Center at 888-762-1100
or by contacting S&C through the S&C Customer
Portal at sandc.com/en/support/sc-customer-
portal/.
STEP 4. After a successful login, the browser will open
the communication gateway General Status
screen with an application navigation menu on
the left side. The Navigation menu will remain
visible for all subordinate menu-interface
screens. When logging in for the rst time, users
will be sent to the Prole screen and be
prompted to change the default password.