User Manual
Table Of Contents
• MAC Address. Displays the MAC Address of the SpeedNet Radio whose signal RSSI value is
displayed.
• RSSI. The RSSI field, which stands for Received Signal Strength Indicator, provides a
measurement of the current RSSI based on the last packet that was received from the destination
radio. RSSI values have a range of 0-255, with larger values equating to better signal quality.
Copyright
© 2010 S&C Electric Co, Cincinnati, Ohio, USA. All rights reserved. This manual and the software
described in it are copyrighted with all rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any
means, without the written permission of S&C Electric Co
S&C Electric Co reserves the right to make changes in specifications and other information contained in
this document without prior notice. The hardware, firmware, and software described in this manual are
subject to change without notice.
IN NO EVENT SHALL S&C ELECTRIC BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS)
ARISING OUT OF, OR RELATED TO, THIS MANUAL OR THE INFORMATION CONTAINED IN IT,
EVEN IF S&C ELECTRIC HAS BEEN ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE
POSSIBILITY OF SUCH DAMAGES.
Trademarks
SpeedNet and the SpeedNet logo are trademarks of S&C Electric Co. All other trademarks are the
property of their respective owners.