User Manual

• Charge status. 0 = ON, 1 = OFF
• Battery failure. 0 = ON, 1 = OFF
• Temperature of BCS. Internal temperature of the SpeedNet Radio, in °F.
• Battery voltage. This value should be 12 to 13 volts unless the battery is discharging.
• Seconds since charge went off. Duration since AC power has been removed.
• Get Battery Status Log. Press the Download button to save the battery status statistics as a
text file.
AODV Tab
The AODV Tab provides statistical information regarding the link quality between all SpeedNet Radios
within wireless communication range of the local SpeedNet Radio. The AODV statistics tab is only active
when the AODV ad-hoc routing protocol has been enabled on the Ad Hoc Routing tab of the IP Routing
configuration page.
The Neighbor List provides a list of SpeedNet Radios that are communicating wirelessly with the local
SpeedNet Radio. The Neighbor list is updated each time a “Hello” message is received from another
SpeedNet Radio.
• IP Address. The IP Address field provides the IP Address of the wireless interface of a
SpeedNet Radios whose “Hello” message has been received by the local SpeedNet Radio.
• Link. Provides a measurement of the local SpeedNet Radio’s signal quality as measured by the
SpeedNet Radio that sent the “Hello” message. This is used to ensure that only bidirectional
links are used for routing wireless data packets.
• Reverse Link. Provides a measurement of the signal quality of the last “Hello” message that was
received from the SpeedNet Radio. The Link measurement is provided in dBm.
RSSI Tab
The RSSI Tab provides statistical information regarding the link quality between all SpeedNet Radios
within wireless communication range of the local SpeedNet Radio. The RSSI tab lists SpeedNet Radios
based on their unique MAC Address.