User Manual

• Datagrams failing to fragment. Total number of data packets discarded because the
fragmentation process failed to fragment the packets.
• Fragments created. Total number of IP data packet fragments created.
Wireless Tab
The Wireless Tab provides the following statistical information regarding the wireless performance of the
SpeedNet Radio.
• Bytes received. Total number of bytes successfully received by the SpeedNet Radio’s wireless
interface.
• Packets received. Total number of packets successfully received by the SpeedNet Radio’s
wireless interface.
• Received packets dropped. Total number of packets received by the SpeedNet Radio’s
wireless interface that failed the validation check for problems such as a corrupted CRC.
• Packets received with bad length. Total number of packets received by the SpeedNet Radio’s
wireless interface that contained checksum errors involving length.
• Packets received with bad CRC. Total number of packets received by the SpeedNet Radio’s
wireless interface that contained checksum errors.
• Bytes transmitted. Total number of bytes transmitted over the SpeedNet Radio’s wireless
interface.
• Packets transmitted. Total number of packets transmitted over the SpeedNet Radio’s wireless
interface.
• Packets repeated. Number of repeated packet transmissions. If a transmission fails to receive a
confirmation of successful reception, the packet is retransmitted.
Batt Status Tab
The Batt Status Tab provides the following statistical information regarding the battery performance when
a battery is connected to the SpeedNet Radio.
• Battery Monitoring. Indicates whether Battery Monitoring has been activated. Battery
Monitoring is enabled by placing a checkmark next to the Enable Battery Testing option, which
is located on the Serial Mode tab of the Interfaces configuration page.
• AC Power. 1 = ON, 0 = OFF