User Manual

MAC Filter Tab
The MAC Filter Tab can be used to view the list of MAC addresses that have been added to the MAC
Address Revocation list using the SpeedNet Radio Security Utility. There are no configurable parameters
on the MAC Filter Tab. All changes to the MAC Revocation list must be made using the SpeedNet Radio
Security Utility and uploaded to the SpeedNet Radio as part of a new security configuration file.
Admin Page
The Admin Page provides a list of tabs that can be used to perform administrative tasks to the SpeedNet
Radio including upgrading firmware and determining system information. Selecting a tab will provide a
list of configurable options.
System Tab
The System Tab is used to view system information, such as the current firmware version. System
information including radio ID and location can be entered by the administrator. The following parameters
can be viewed or configured:
• Build Date. This read-only field provides information regarding the date that the current
SpeedNet Radio firmware was created.
• MIB_Version. This read-only field provides information regarding the current Management
Information Base (MIB) that is being used by the SNMP protocol.
• Firmware_Version. This read-only field displays the current firmware version that is installed on
the SpeedNet Radio
• Running Time. This read-only field displays the elapsed time since the last time the SpeedNet
Radio was rebooted.
• SpeedNet Radio ID. This field can be used by Administrators to assign a descriptive name to the
SpeedNet Radio. The SpeedNet Radio ID must consist of ASCII values but cannot contain
spaces or the following characters: ”$”, “^”, “&”, “(“, or “)”.
• System Name. This field can be used by Administrators to assign a descriptive name to the
entire network. The System ID must consist of ASCII values.
• System Location. This field can be used by Administrators to note the location of the network.
The System ID must consist of ASCII values.
• System Contact. This field can be used by Administrators to list the point of contact for the
SpeedNet Radio network. The System ID must consist of ASCII values.