User Manual

ionTig 200 Pulse PFC

1. SAFETY

1.1 Signal Explanation

 Welding may damage your body or others, so please take protection

measure in operation.

 Only ones who are trained professionally can install, debug, operate,

maintain and repair the equipment.

 Do not maintain and repair the machine when the machine is

connected with power.

THE ROTATING PARTS MAY BE DANGEROUS

 Keep all equipment safety guards, covers and devices in position and

in good repair. Keep hands, hair, clothing and tools away from V-belts,

gears, fans and all other moving parts when starting, operating or

repairing equipment.

 Do not put your hands near the engine fan. Do not attempt to override

the governor or idler by pushing on the throttle control rods while the

engine is running.

 Use only compressed gas cylinders containing the correct shielding

gas for the process used and properly operating regulators designed

for the gas and pressure used. All hoses, fittings, etc. should be

suitable for the application and maintained in good condition.

 Always keep cylinders in an upright position securely chained to an

undercarriage or fixed support.

 Cylinders should be located:

o Away from areas where they may be struck or subjected to

physical damage.

o A safe distance from arc welding or cutting operations and any

other source of heat, sparks, or flame.

 Never allow the electrode, electrode holder or any other electrically

“hot” parts to touch a cylinder.

 Keep your head and face away from the cylinder valve outlet when

opening the cylinder valve.

 Valve protection caps should always be in place and hand tight except

when the cylinder is in use or connected for use.