User Manual

ionTig 200 Pulse PFC

4.5 Operation Environment

● Height above sea level is below 1000m.

● Operation temperature range:-10

C～+40

● Relative humidity is below 90 % (20

C).

● Preferably site the machine some angles above the floor level, the maximum angle does not exceed

● Protect the machine against heavy rain or in hot circumstance against direct sunshine.

● The content of dust, acid, corrosive gas in the surrounding air or substance cannot exceed normal

standard.

● Take care that there is sufficient ventilation during welding. There is at least 30cm free distance

between the machine and wall.

4.6 Operation Notices

● Read §1 carefully before attempting to use this equipment.

● Connect the ground wire with the machine directly, and refer to §3.5.

● In case closing the power switch, no-load voltage may be exported. Do not touch the output electrode

with any part of your body.

● Before operation, no concerned people should be left. Do not watch the arc in unprotected eyes.

● Ensure good ventilation of the machine to improve duty ratio.

273

2.5

8～10

2.5

110～

125

14～16

12～14

5～6

325

2.5

8～10

2.5

120～

140

14～16

12～14

5～6

Notice: the above parameters originate from《Welding Dictionary》P167, Volume 1 of Edition 2.