User Manual

ionTig 200 Pulse PFC
Copyright © Mundaka Welding & Gases, Inc.
17
Is Starting current (only with 4T)
Unit A
Setting range 5—100%of main current Iw
Factory setting
Tup Upslope time
Unit S
Setting range 0.0—2.0
Factory setting
Iw Welding current
Unit A
TIG 200 DC PULSE 5—200；
TIG 200 DC PULSE PFC 5—200；
TIG 180 DC PULSE PFC 5—180；
Ib Base current
Unit A
TIG 200 DC PULSE 5—200；
TIG 200 DC PULSE PFC 5—200；
TIG 180 DC PULSE PFC 5—180；
Important! Only selectable when “pulse key” has been pressed.
Dcy Ratio of pulse duration to base current duration
Unit %
Setting range 5—100
Factory setting
Important! Only selectable when “pulse key” has been pressed.
Fp Pulse frequency
Unit Hz
Setting range 0.5—200
Factory setting
Important! Only selectable when “pulse key” has been pressed.
Tdown Downslope time