User Manual

ionTig 200 Pulse PFC

-shown on the display during welding.

The illustration below shows an overview of the main settings needed for day-to-day working, using

the TIG 200 DC PULSE control panel as an example. You will find a detailed description of these settings

in the following section.

(1)TIG mode selecting key

2-step mode 4-step mode

(2)Parameter select and adjust

Push the encoder to select the parameter if the parameter indicator lights up, then the selected parameter can

be altered on adjusting dial.

Available parameters where 2T and 4T mode have been selected:

Tpr Gas pre-flow time

Unit S

Setting range 0.1—1

Factory setting

Tpr

Tup

Tpo

Tdown

Dcy