User Manual

ionTig 200 Pulse PFC

(1) Positive output: The welder’s positive polarity output.

(2) Negative output: The welder’s negative polarity output.

(3) Aero socket: Is connected to torch switch control wire.（It has 14 leads and lead 8 - lead 9

are connected to torch switch control wire）.

(4) Shield gas connector: Is connected to the gas input pipe of torch.

(5) Power source switch: Switch to “ON”, the welder is turned on, while switch to “OFF”, the

welder is turned off.

(6) Power source input: To connect power source.

(7) Shield gas input joint: To connect one head of the gas hose while the other head of which is

connected to argon gas cylinder.

4.2 Control panel

Overview

The key feature of the control panel is the logical way in which the controls are arranged. All the main

parameters needed for day-to-day working can easily be

-selected with the keys.

-altered with the adjusting dial.