User Manual

ionMig 200 PFC

2. Overview

2.1 Brief Introduction

MIG SERIES arc welding machine adopts the latest pulse width modulation (PWM) technology and

insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium

frequency so as to replace the traditional hulking work frequency transformer with the cabinet medium

frequency transformer. Thus, it is characterized with portable, small size, light weight, low consumption

and etc.

MIG SERIES arc welding machine uses Mix gas as shielded gas to realize gas shielded welding,

active gas（Ar+O

、Ar+CO

） as shielded gas to realize MAG welding and inactive gas（Ar）as

shielded gas to realize MIG welding.

MIG SERIESarc welding machine has automatic protection functions with intelligent to over-voltage,

over-current and over-heat. If any one of the above problems happens, the alarm lamp on the front

panel will be lighted and output current will be shut off automatically to protect itself and prolong the

equipment using life.

MIG SERIES Features:

1. Digital control system, real-time display the welding parameters;

2. High performance multifunction power source (MMA/MIG/MAG);

3. Waveform control, stable welding arc;

4. IGBT technology, low power dissipation;

5. Rated duty circle is 40 % (40℃).

MULTIMIG 160/200 has another feature: Synergic control of the welding current and voltage.

MIG SERIES arc welding machine is suitable for all positions welding for various plates made of

stainless steel, carbon steel, alloyed steel, copper, titanium, etc, which is also applied to pipe