Datasheet

Polystyrol 495 F
SB BASF
Other text information
Injection molding
PROCESSING
injection molding, Melt temperature, range: 180 - 260 °C
injection molding, Melt temperature, recommended: 220 °C
injection molding, Mold temperature, range: 10 - 60 °C
injection molding, Mold temperature, recommended: 40 °C
Polystyrol 495 F can be injection moulded under different conditions depending on machinery available and articles
moulded. Mass temperature can be as high as 260°C. Polystyrol 495 F is suitable for gas assisted injection moulding.
Page: 2/2Created: 2010-03-04 Source: www.materialdatacenter.com
Copyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the
use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out
that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for
the content of this system.