Specifications Sheet

SolarFoot
TM
Mounting for Exposed Fastener Roong
Fastener Selection
To source fasteners for your projects, contact S-5!
When other brands claim to be “just as good as S-5!”, tell them to PROVE IT.
The SolarFoot is a simple, cost-eective pedestal for L-Foot (not included)
attachment of rail-mounted solar PV. The unique design is compatible with
all rail producer L-Foot components. The new SolarFoot assembly ensures a
durable weathertight solution for the life of the roof. Special factory applied
butyl co-polymeric sealant contained in a reservoir is The Right Way, allowing a
water-tested seal. Stainless integrated stud and hex ange lock-nut secure the
L-Foot into position. A low center of gravity reduces the moment arm commonly
associated with L-Foot attachments. Direct attachment of the SolarFoot to the
structural member or deck provides unparalleled holding strength.
*Fasteners sold separately. Fastener type varies with substrate. Contact S-5! on how to purchase fasteners
and obtain our test results. L-Foot also sold separately.
Distributed by:
SolarFoot Advantages:
Exposed fastener mounting
platform for solar arrays attached
via L-Foot and Rails
Weatherproof attachment to
exposed fastener roofing
Butyl sealant reservoir provides
long-term waterproof seal
M8-1.25x17mm stud with M8 hex
flange nut for attachment of all
popular L-Foot/rail combinations
Tool: 13 mm Hex Socket or ½”
Hex Socket
Tool Required: Electric screw gun
with hex drive socket for self-
tapping screws.
Low Center of Gravity reduces
moment arm commonly
associated with L-Foot/Rail solar
mounting scenarios
Attaches directly to structure or
deck for optimal holding strength
S-5! Recommended substrate-
specific (e.g. steel purlin, wood
2x4, OSB, etc.) fasteners provide
excellent waterproofing and pull-
out strength
Fastener through-hole
locations comply with NDS
(National Design Specification)for
Wood Construction
S-5!® Warning! Please use this product responsibly!
The independent lab test data found at www.S-5.com can be used for load-critical designs and applications.
Products are protected by multiple U.S. and foreign patents. For published data regarding holding strength,
fastener torque, patents, and trademarks, visit the S-5! website at www.S-5.com. Copyright 2017, Metal Roof
Innovations, Ltd. S-5! products are patent protected.
Copyright 2017, Metal Roof Innovations, Ltd.
Version 102017
.50in
1.00in
1.50in
.50in
1.83in
3.17in
2.00in
3.67in
(4x)
8mm
.315in
.66in
17mm
.67in
1.32in
1.39in
.32in
Factory Applied
Butyl Sealant
M8-1.25 Stainless Steel
Threaded Stud
Metal to Metal:
1/4-14 Self Drilling Screw
1-1/2" to 2-1/2"
Metal to Wood:
1/4-14 Type 17 AB Milled Point
1-1/2" to 2-1/2"
P: 800-284-1412
F: 903-759-3598
W: www.lmcurbs.com