Specifications
To Install SolarFoot
™
1. Determine the location of the supporting structure of the roof. Wipe away excess oil and debris from the desired mounting
location.
2. Peel the release paper from the base, align, and apply to roof surface so that fasteners will engage the structure below.
3. Install screws through the pre-punched holes in the SolarFoot into the structure below.
4. Install the L-Foot over the stud and secure in place with the provided M8-1.25 hex ange nut tightened to 160 inch
pounds (13 ft lbs).
NOTE: Attachment frequency and spacing for PV arrays is the responsibility of the system designer. The makers of S-5!
SolarFoot make no representations with respect to the variables involved in PV array design. Visit the S-5! website for load
testing data.
1
2
3 4
SolarFoot Installation Instructions
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. For published data regarding holding strength, fastener torque, patents, and trademarks, visit the S-5! website at www.S-5.com.
Copyright 2017, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. .
These instructions are for use by those experienced in the trade. Always follow appropriate safety precautions and use appropriate tools.
LP66-V1.0_08/17