Datasheet

Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. Consult the S-5! website at www.S-5.com for
published data regarding installation instructions and holding strength.
Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 052115.
The strength of the S-5-V clamp is in its simple design. The patented
setscrews will slightly dimple the metal seam material but not pierce it—
leaving the roof manufacturer's warranty intact.
S-5-V Mini Clamp
S-5-V Clamp
1.50”
(38.10 mm)
1.18”
(29.97 mm)
0.90”
(22.86 mm)
0.47”
(11.94 mm)
0.54”
(13.72 mm)
0.47”
(11.94 mm)
0.54”
(13.72 mm)
1.50”
(38.10 mm)
0.90”
(22.86 mm)
2.00”
(50.80 mm)
Two M8-1.25
Threaded Holes
0.48”
(12.20 mm)
Two 3/8-24 X 0.80"
Round-Point
Setscrews
M8-1.25 X 16.00 mm
Hex Flange Bolt
One M8-1.25
Threaded Hole
Centered On Part
0.48”
(12.20 mm)
One 3/8-24 X 0.80"
Round-Point
Setscrew
1.50”
(38.10 mm)
M8-1.25 X 16.00 mm
Hex Flange Bolt
1.50”
(38.10 mm)
Example Proles
The S-5-V and S-5-V Mini clamps are each furnished
with the hardware shown to the right. Each box also
includes a bit tip for tightening setscrews using an
electric screw gun. A structural aluminum attachment
clamp, the S-5-V is compatible with most common
metal roong materials excluding copper. All included
hardware is stainless steel. Please visit www.S-5.com for
more information including CAD details, metallurgical
compatibilities, and specications.
The S-5-V clamp has been tested for load-to-failure
results on most major brands and profiles of standing
seam roofing. The independent lab test data found at
www.S-5.com can be used for load-critical designs and
applications. S-5!® holding strength is unmatched in
the industry.