Brochure & Specifications

The S-5-S clamp was

created specically for

popular snap-together

proles.

S-5-S Mini Clamp

The S-5-S Mini is a bit shorter than the

S-5-S and has one setscrew rather than

two. The mini is the choice for attaching

all kinds of rooftop accessories: signs,

walkways, satellite dishes, antennas,

rooftop lighting, lightning protection

systems, solar arrays, exhaust stack

bracing, conduit, condensate lines,

mechanical equipment—just about

anything!*

*S-5! mini clamps are not compatible with, and should not

be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

S-5-S Clamp

The S-5-S clamp was created specically

for popular snap-together proles—

including residential proles by Taylor

Metals and Easy Lock Standing Seam.

For horizontal seams under .540 inches

(like the Firestone UC4) the S-5-S or

S-5-S Mini can be used to avoid the

necessity of crimping the seam.

Its simple design and size make it

perfect for use with S-5!® snow retention

products and other heavy-duty

applications. Installation is as simple

as setting the patented round-point

setscrews into the clamp, placing the

clamp on the seam, and tightening

them to the specied tension. Then, ax

ancillary items using the bolt provided

with the product. Go to

www.S-5.com/tools for information and

tools available for properly attaching

and tensioning S-5! clamps.

The right way to attach almost anything to metal roofs!

888-825-3432 | www.S-5.com

S-5-S and S-5-S Mini

PAGE 1
S-5-S and S-5-S Mini The S-5-S clamp was created specifically for popular snap-together profiles— including residential profiles by Taylor Metals and Easy Lock Standing Seam. For horizontal seams under .540 inches (like the Firestone UC4) the S-5-S or S-5‑S Mini can be used to avoid the necessity of crimping the seam. Its simple design and size make it perfect for use with S-5!® snow retention products and other heavy-duty applications.
PAGE 2
The strength of the S-5-S clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but not pierce it— leaving roof warranties intact. S-5-S Clamp The S-5-S and S-5-S Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-S is compatible with most common metal roofing materials excluding copper.