Datasheet

Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. For maximum holding strength, setscrews should
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
veried using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel,
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 052115.
The strength of the S-5-Q clamp is in its simple design. The patented
setscrews will slightly dimple the metal seam material but will not puncture
it —leaving roof manufacturers' warranties intact.
M8-1.25x16 mm
Hex Flange Bolt
M8-1.25x16 mm
Hex Flange Bolt
2.00"
(51.00 mm)
1.18"
(30.00 mm)
M8-1.25 mm
Threaded Hole
M8-1.25 mm
Threaded Hole
2.35"
(60.00 mm)
2.35"
(60.00 mm)
2.29"
(58.00 mm)
1.69"
(43.00 mm)
1.69"
(43.00 mm)
2.29"
(58.00 mm)
0.54"
(14.00 mm)
0.54"
(14.00 mm)
1.29"
(33.00 mm)
1.25"
(32.00 mm)
0.38"
(10.00 mm)
1.29"
(33.00 mm)
Two 3/8-24 X 0.80"
Round-Point
Setscrews
3/8-24 X 0.80"
Round-Point Setscrew
The S-5-Q and S-5-Q Mini clamps are each furnished
with the hardware shown to the right. Each box also
includes a bit tip for tightening setscrews using an
electric screw gun. The structural 6000 series aluminum
attachment clamp is compatible with most common
metal roong materials excluding copper. All included
hardware 3000 series is stainless steel. Please visit
www.S-5.com for more information including CAD
details, metallurgical compatibilities, and specications.
The S-5-Q clamp has been tested for load-to-failure
results on a variety of bulb-shaped standing seam
roof proles from leading panel manufacturers. The
independent lab test reports found on our website
at www.S-5.com prove that S-5!® holding strength is
unmatched in the industry.
S-5-Q Mini
S-5-Q
Please note: All measurements are rounded to the second decimal place.
Example Proles