Installation Guide

S-5-PV Kit Installation Instructions S-5-PV Kit Installation Instructions
A. Standing Seam Metal Roof
B. S-5!® Mini Clamp (Sold separately)
C. Stainless Steel Mounting Disc
D. Stainless Steel M8–1.25x68 mm Universal PV Stud w/hex nut(Tensioned between 140 and 160 inch pounds)
E. Glass
F. Module Frame Cross Section (Frame thickness from 1.3" [33 mm] to 2.5" [64 mm])
G. Universal PV Grab
H. Stainless Steel M8–1.25 Hex Flange Nut (Tensioned between 100 and 120 inch pounds)
A. Standing Seam Metal Roof
B. S-5!® Mini Clamp (Sold separately)
C. Stainless Steel Mounting Disc
D. Stainless Steel M8–1.25x68 mm Universal PV Stud w/hex nut (Tensioned between 140 and 160 inch pounds)
E. Glass
F. Module Frame Cross Section (Frame thickness from 1.3” [33 mm] to 2.5” [64 mm])
G. EdgeGrab™ Serrated L-Flange (See installation instructions, Steps 4 and 5, for details on EdgeGrab)
H. EdgeGrab Serrated Top Component (See installation instructions, Steps 4 and 5, for details on EdgeGrab)
I. Stainless Steel M8–1.25 Hex Flange Nut (Tensioned between 100 and 120 inch pounds)
EdgeGrab™
Edge Condition
PV Mounting Assembly
Field Condition
F
H
G
E
D
C
B
A
I
Perforated
Node
Module
Placement
Bevel
G
E
D
F
C
B
A
H
Perforated
Node
Module
Placement
Bevel