Brochure & Specifications

ManualsBrandsS-5! ManualsSolar & Wind PowerHeavy Duty Clamp

The S-5-KHD clamp

features an insert that is

placed on the intermediate

seam for extra hold.

The right way to attach almost anything to metal roofs!

S-5-KHD

888-825-3432 | www.S-5.com

S-5-KHD Clamp

The S-5-KHD is the most heavy-duty

and durable clamp in the S-5!® family.

Designed primarily for new construction,

this clamp ts the very distinctive

proles of the Lysaght® Klip-Lok® 406,

McElroy Mirage, Metal Sales Clip-Loc,

and AEP Span Klip-Rib®. This clamp

features an insert that is placed on

the intermediate seam for extra hold.

Signicantly stronger than anything

else on the market for these prole

types, this clamp is geared for snow

retention systems and other heavy

duty applications in new construction

where holding strength is critical. More

strength means fewer rows of assembly,

and roof warranties remain intact with

zero-penetration S-5! technology.

For load critical applications such as snow

retention and attaching solar panels,

the assembly should be specically

engineered to each individual project for

maximum protection. See www.S-5.com

for full details.

In new construction, installation is as

easy as snapping the S-5-KHD insert

into the proper position under the roof

panel, avoiding clips. Next, install the

roof and place the S-5-KHD clamp above

the insert on top of the installed panel.

Tighten setscrews (two on each side) to

specied tension. Then, ax ancillary

items using the bolt provided. For

more detailed installation instructions,

including steps for retrot construction,

see the full S-5-KHD installation

instructions available from your

distributor and at www.S-5.com.

Summary of content (2 pages)

PAGE 1
S-5-KHD The S-5-KHD is the most heavy-duty and durable clamp in the S-5!® family. Designed primarily for new construction, this clamp fits the very distinctive profiles of the Lysaght® Klip-Lok® 406, McElroy Mirage, Metal Sales Clip-Loc, and AEP Span Klip-Rib®. This clamp features an insert that is placed on the intermediate seam for extra hold.
PAGE 2
The strength of the S-5-KHD clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but not pierce it— leaving roof warranties intact. The S-5-KHD clamp is furnished with the hardware shown to the right. Each box also includes a bit tip for tightening the four setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5‑KHD is compatible with most common metal roofing materials excluding copper. All included hardware is stainless steel.