Datasheet

Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. Consult the S-5! website at www.S-5.com for
published data regarding installation instructions and holding strength.
Copyright 2015, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 052115.
The strength of the S-5-H90 clamp is in its simple design. The patented
setscrews will slightly dimple the metal seam material but will not puncture
it —leaving roof manufacturers' warranties intact.
Two 3/8-24 X 0.80"
Round-Point
Setscrews
One 3/8-24 X 0.80"
Round-Point
Setscrew
2.00"
(50.80 mm)
1.20"
(30.48 mm)
0.50"
(12.70 mm)
0.60"
(15.24 mm)
0.38"
(9.65 mm)
1.50"
(38.10 mm)
1.50"
(38.10 mm)
0.90"
(22.86 mm)
0.90"
(22.86 mm)
1.50"
(38.10 mm)
1.50"
(38.10 mm)
0.40"
(10.16 mm)
0.40"
(10.16 mm)
0.48"
(12.19 mm)
0.75"
(19.05 mm)
0.31"
(7.87 mm)
0.48"
(12.19 mm)
0.75"
(19.05 mm)
0.31"
(7.87 mm)
0.54"
(13.72 mm)
0.54"
(13.72 mm)
(2x) M8-1.25
Threaded Hole
M8-1.25
Threaded Hole
(2x) 3/8-24
Threaded Hole
3/8-24
Threaded Hole
M8-1.25 X 16 mm
Hex Flange Bolt
M8-1.25 X 16 mm
Hex Flange Bolt
S-5-H90
The S-5-H90 and S-5-H90 Mini clamps are each
furnished with the hardware shown to the right. Each
box also includes a bit tip for tightening setscrews
using an electric screw gun. The structural aluminum
attachment clamp is compatible with all common
metal roong materials excluding copper. All necessary
stainless steel hardware is included. Please visit
www.S-5.com for more information including CAD
details, metallurgical compatibilities, and specications.
The S-5-H90 clamp has been tested for load-to-failure
results on a variety of horizontal standing seam
roof proles from leading panel manufacturers. The
independent lab test reports found on our website
at www.S-5.com prove that S-5!® holding strength is
unmatched in the industry.
S-5-H90 Mini
Example Proles
0.65"
Top Seam