Mounting Brochure

Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. Consult the S-5! website at www.S-5.com for
published data regarding installation instructions and holding strength.
Copyright 2014, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 102814.
The strength of the S-5-H clamp is in its simple design. The patented
setscrews will slightly dimple the metal seam material but will not puncture
it —leaving roof manufacturers' warranties intact.
Two 3/8-24 X 0.80"
Round-Point
Setscrews
One 3/8-24 X 0.80"
Round-Point
Setscrew
0.38"
(9.65 mm)
0.59"
(14.99 mm)
0.53"
(13.46 mm)
0.53"
(13.46 mm)
0.47"
(11.94 mm)
0.47"
(11.94 mm)
0.79"
(20.07 mm)
0.79"
(20.07 mm)
0.53"
(13.46 mm)
0.53"
(13.46 mm)
1.73"
(43.94 mm)
1.73"
(43.94 mm)
2.00"
(50.80 mm)
1.18"
(29.97 mm)
1.13"
(28.70 mm)
1.13"
(28.70 mm)
1.26"
(32.00 mm)
1.26"
(32.00 mm)
.61"
(15.49 mm)
.61"
(15.49 mm)
2.32"
(58.93 mm)
2.32"
(58.93 mm)
M8-1.25
Threaded Hole
M8-1.25
Threaded Hole
M8-1.25 X 16 mm
Hex Flange Bolt
M8-1.25 X 16 mm
Hex Flange Bolt
The S-5-H and S-5-H Mini clamps are each furnished
with the hardware shown to the right. Each box also
includes a bit tip for tightening setscrews using an
electric screw gun. The structural aluminum attachment
clamp is compatible with most common metal roong
materials excluding copper. All included hardware
is stainless steel. Please visit www.S-5.com for more
information including CAD details, metallurgical
compatibilities, and specications.
The S-5-H clamp has been tested for load-to-failure
results on a variety of horizontal standing seam
roof proles from leading panel manufacturers. The
independent lab test reports found on our website
at www.S-5.com prove that S-5!® holding strength is
unmatched in the industry.
S-5-H Mini
S-5-H
Example Proles