Datasheet

ManualsBrandsS-5! ManualsSolar & Wind PowerS5-GXM-10-insert

The S-5-K Grip

™

was

specically developed to

t Klip-Rib

and other bulb

snap-together seams.

The right way to attach almost anything to metal roofs!

S-5-K Grip

™

and S-5-K Grip

™

Mini

888-825-3432 | www.S-5.com |

S-5-K Grip

™

Clamp

The S-5-K Grip™ clamp was specically

developed to t Klip-Rib® and other bulb

snap-together seams. The design utilizes

multiple inserts (sold separately) in order

to accommodate a variety of bulb snap-

together proles. Each insert has a unique

shape that allows for a tight t and provides

increased holding strength over other

attachment options.

The S-5-K Grip also eliminates the large

moment arm other clamps use for these

proles. Instead, it features a low mounting

surface area, with the mounting bolt directly

over the center of the seam. This dramatically

increases the strength of the clamp, making it

perfect for use with heavy-duty applications.

The head of the anged bolts control the

amount of compression, which reduces the

possibility of over-compressing the seam,

and makes installation a snap!

Just place the clamp on the seam, position

the insert piece, and tighten the anged

bolts at the base. Then, ax ancillary items

using the top bolt provided. Go to:

www.S-5.com/tools for information about

properly attaching S-5!® clamps.

S-5-K Grip

™

Mini Clamp

The S-5-K Grip Mini is a bit shorter than

the S-5-K Grip and has one base bolt

rather than two. The mini is the choice for

attaching all kinds of rooftop accessories:

signs, walkways, satellite dishes, antennas,

rooftop lighting, lightning protection

systems, solar arrays, exhaust stack bracing,

conduit, condensate lines, mechanical

equipment—just about anything!*

*S-5! mini clamps are not compatible with, and should not

be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

Summary of content (2 pages)

PAGE 1
S-5-K Grip™ and S-5-K Grip™ Mini The S-5-K Grip™ clamp was specifically developed to fit Klip-Rib® and other bulb snap-together seams. The design utilizes multiple inserts (sold separately) in order to accommodate a variety of bulb snaptogether profiles. Each insert has a unique shape that allows for a tight fit and provides increased holding strength over other attachment options. The S-5-K Grip also eliminates the large moment arm other clamps use for these profiles.
PAGE 2
The S-5-K Grip™ eliminates the large moment arm and features a low mounting surface area with the mounting bolt directly over the center of the seam, which dramatically increases the strength of the clamp. The S-5-K Grip™ and S-5-K Grip Mini clamps are each furnished with the hardware shown to the right. A structural aluminum attachment clamp, the S-5-K Grip is compatible with most common metal roofing materials excluding copper. All included hardware is stainless steel. Please visit www.S-5.