Datasheet

The S-5-E clamp is

secured with our patented

round-point setscrews

without piercing the

metal roof panel, thereby

preserving the roof

manufacturer's warranty!

The right way to attach almost anything to metal roofs!

S-5-E and S-5-E Mini

888-825-3432 | www.S-5.com

S-5-E Clamp

The S-5-E clamp is designed specially

for double-folded standing seam

roof proles having the appropriate

dimensioning.

Although a bit smaller and less

expensive than the S-5-U, for these

proles, the S-5-E is just as strong.

The S-5-E is perfect for use with S-5!®

ColorGard® snow retention systems and

other heavy-duty applications.

Installation is as simple as placing the

clamp on the seam and tightening the

patented round-point setscrews to the

specied tension. Then, ax ancillary

items using the bolt provided. Go to

www.S-5.com/tools for information and

tools available for properly attaching

and tensioning S-5! clamps.

S-5-E Mini Clamp

The S-5-E Mini is a bit shorter than the

S-5-E and has one setscrew rather than

two. The mini is the choice for attaching

all kinds of rooftop accessories: signs,

walkways, satellite dishes, antennas,

rooftop lighting, lightning protection

systems, solar arrays, exhaust stack

bracing, conduit, condensate lines,

mechanical equipment—just about

anything!*

*S-5! mini clamps are not compatible with, and should not

be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

PAGE 1
S-5-E and S-5-E Mini S-5-E Clamp Although a bit smaller and less expensive than the S-5-U, for these profiles, the S-5-E is just as strong. The S-5-E is perfect for use with S-5!® ColorGard® snow retention systems and other heavy-duty applications. Installation is as simple as placing the clamp on the seam and tightening the patented round-point setscrews to the specified tension. Then, affix ancillary items using the bolt provided. Go to www.S-5.
PAGE 2
The strength of the S-5-E clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but will not puncture it—leaving roof warranties intact. The S-5-E and S-5-E Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-E is compatible with most common metal roofing materials excluding copper.